1.) Buy the refrigerator with an appropriate climatic class;

2.) When installing it, choose a cool place. The fridge should not be placed too close to any heat source (fireplace, stove, oven, radiator, direct sunlight);

3.) The back of the refrigerator must be at least 80 mm far from the wall to allow the hot air ventilation;

4.) If the refrigerator is built-in or undercounter, there must be also enough space above it so that the air ventilation is not restricted;

5.) Know what you have in your refrigerator. First think than take what you need. Do not open the door too often and do not leave it open too long;

6.) All the newer fridges have adjustable “legs” in their front part, right under the door. After installing the fridge (and loading it up to the standard level) play little with these legs and try to adjust them so that the door will close automatically from any position when they´re open. Even if the fridge door closes automatically, always check if it´s really closed. 75% of all power over-consumption is caused by insufficient refrigerator door sealing;

7.) If it isn´t a “frost free” model, the refrigerator must be defrost manually if the frost thickness exceeds 5mm;

8.) Use an inner thermometer (lot of newer refrigerators have a built-in thermometer), the inner temperature should not be lower than 3 and not exceed 10 Celsius degrees;

9.) Never put a hot dishes in the refrigerator. The elementary school physics taught us that the hot (dish) and cold (air inside the fridge) objects in a closed environment (the refrigerator) will exchange their temperatures with each other unless they reach a thermal balance. That means that not only refrigerator will cool the hot dishes but also the dishes will warm the refrigerator inner space. Therefore the things you put in the refrigerator should be as cold as possible. Simply, give the dish a time to cool down to the room´s temperature and only then put it in the refrigerator;

10.) Empty, unplug and clean the fridge each time you spend more than 1-2 weeks out of your home (e.g. on vacation). Just emptying the refrigerator leaving it plugged (for the purpose of cooling the air in it) really is not very effective.

Vilo runs cuple of “home and garden” oriented sites like 7 refrigerators, this roofing shingles related site or 7 vacuum cleaners.

Hitachi is an international company, but the United States headquarters is located in Atlanta, Georgia. Hitachi products are available in almost 4000 retail stores with service centers numbering over a thousand. Hitachi claims on their website to have the best power tools available for professional use.

The United States branch of the Hitachi Corporation has been independently operating since 1948. However, their affiliation with the parent company affords Hitachi the advantages of quick access to new technology that is developed in other fields but can also advance the efficiency and performance of power tools. Because of Hitachi’s expertise in metallurgy, plastics, and casting, this company can make power tools that are easier to use as well as faster in performance and more durable for long term use.

Hitachi uses a three dimensional computer aided design (CAD) system to build its power tools in virtuality before building a live prototype. By using this virtual prototype, Hitachi can do extensive analysis to find out where the most likely failures will happen. In this virtual setting the power tools can be tested for strength, vibration resistance, effects of impact, effects of harsh environmental conditions, and effectiveness of safety features. This process saves time and money by eliminating the need to build a real prototype and test it just to find that they have to go back to the designing board to start all over again.

This design system has led to improvements such as a cooling system that allows the tools to run for longer periods of time without burning out. Another technological advance improves the balance so that tools are lighter and easier to maneuver.

Hitachi’s table saws benefit from all of these designs and advances. They offer three different models of table saws for various levels of work conditions.

1. C10FL 10″ Stationary Table Saw
This table saw is built for long rip cuts and repeated cross cuts. It has a 3 horsepower motor that is fully encased to protect it from the damages of dust and debris. The blade adjustment knobs are conveniently located on the front of the table saw. It includes a tabletop angle scale, T-slot miter gauge, and caster set, as well as a dust collection hook-up.

2. C10FR 10″ Job site Table Saw
This table saw is designed to do most of the same work as the stationary table saw but with some added features for portability. This model includes an LED light to make it easier to see the piece you are working on. It also has a cut indicator, miter gauge with nine positive stops, a dust chute, and a handy fold-and-roll stand to make moving the whole table saw easy.

3. C10RA2 Table Saw with Stand
This portable table saw is somewhat smaller than the previous two models. The motor is 2.6 horsepower with a locking rip fence and front and rear guide bars. Safety features include a clear blade guard, a splitter that directs the split wood away from the user, an anti-kickback feature, and an electric brake. The tabletop is smaller, but this table saw only weights 64 pounds.

Hitachi warrants portable tools for five years and stationary tools for two years for the original owner. Any accessories are warranted for thirty days.

The company web site includes many positive testimonials from satisfied customers. Hitachi is a well-known table saw manufacturer with many retailers around the United States, so you are sure to find one of their table saws that might fit your needs.

Johnathon is a professional carpenter for over 20 years and has experience in helping customers renovate their homes. Johnathon is woodwork enthusiast who works with jigsaws, table saws, circular saws and many other varieties of saws. Visit his specialty site on delta table saws at http://www.szaws.com.

Does every member of your family want to take a shower in the morning? And the last person always runs out of hot water? No matter how big is your water tank is, it will eventually run out leaving you with a cold shower. Is there anything you can do to fix this situation? Actually, yes, you can get a new heater called an instant water heater. Discover what are the benefits of instant water heaters compared to traditional tank heaters.

Advantages of instant water heaters

An instant tankless heater has several advantages when compared to a conventional water heater:

- It saves you energy

- It heats water as you use it, as much as you use it and never runs out

- It takes very little space

Common water heater usually has a tank that holds 40 to 80 gallons of water, keeping it hot at all times, day and night. As you use the hot water for showers, doing dishes and so on, it is replaced with cold water and heated. When you are not using hot water and even when you are not home all together, hot water just sits in the tank and as it waits to be used it loses the temperature. So the heater reheats water in your tank every now and then. This means loss of energy for you.

Instant water heaters don’t have a tank. For this reason they are also called tankless water heaters. As soon as you turn on hot water the unit turns on and heats the water, typically at 125 degrees Fahrenheit. So this type of heater doesn’t use energy until the faucet is turned on. It produces hot water instantly and if that temperature is too hot for you simply regulate it by turning on the cold water. When you are finished and turn hot water off, the instant water heater shuts down straight away, using no energy. This can cut your energy bill almost by 50% every month.

Energy is not the only thing you save, a tankless heater will also save you water. You know how you always have to let the cold water run first, before the hot comes out? With an instant tankless water heater the water is hot from the start, so there is no need to run the water to before it turns hot.

When room is a consideration, a tankless heater also offers a solution. Comparable to a traditional 40-60 gallon water tank, an instant unit is very small. It can be easily installed in a small home or apartment.

Industrial instant water heaters

While tankless heaters are most used in residential homes, great energy savings lead to their commercial use as well. And more water you use more you save, for example a house using 120 gallons of water a day with a 40-gallon hot water tank typically spends $112.25 per month on heating water. For the same usage, an instant tankless water heater will cost you only about $26.95 per month.

Cost of instant tankless water heater

Initial cost is the main disadvantage of a tankless heater. It costs much more than the conventional one. But as you can see, the energy savings will compensate for this very soon, probably in the first 6-8 month of using your new heater. And if the cost is a concern, look for discounted instant water heaters online. With internet retailers you can always get your tankless heater cheaper.

For more information and price comparison of instant water heaters check Heaters Guide. We provide buying tips for all types of water heaters.

If Your Air Conditioner Filter Is The Efficient Type You Should Make Frequent Checkup, Clean Or Replace It For Optimum Performance. Your Air Conditioner filter will have a lot of job to do if you have a filthy indoor air. If your Air Conditioner is fitted with a quality filter, but you fail to keep it clean, you may still get the coolness or heat but your indoor air hygiene will be next to nothing, and thus expose you and your family to air borne health risks.

If on the other hand your Air Conditioner is fitted with economy panel filters from your local hardware store, because they come cheap, you are not doing yourself, your family or your air conditioning equipment any good. An Air Conditioner filter that does not do the job is worse than no air filter at all.

Do you know that the economy panel filters are so useless you could leave one in your air conditioner for a year and it would not gather sufficient dust to necessitate cleaning or changing? The worse of what these good for nothing filters will do, instead of cleaning your indoor air, is make dirty the evaporator coil of your air conditioner. You will have to clean the evaporator regularly to remove the dirt that should have been stopped by the filter.

Friend, you can see that the only way to get your Air Conditioner to do the three functions of cleaning, cooling and heating is to ensure that it is installed with the best air filter for the mutual good of you and your Air Conditioner.

Recommended:
Choosing an air conditioner filter for durable air filter selection tips.

Air Filter Selection Success Free Information is a road map to successful electric air filter selection. You will do well to email this article to family, friends and colleagues, they will love it.

If you are interested in upgrading your current water heater system then be prepared to find many options to choose from on the market. Many of the newer models allow consumers the ability to heat the water they use in their home quickly, efficiently, and to always have plenty of hot water on demand. Before you rush out to purchase a tankless water heater take your time to make sure it is right for your home. It is an investment that is quite expensive so don’t do it if the benefits aren’t going to come with it.

The most popular style of new water heaters on the market is the tankless water heater. It is very popular because it doesn’t take up very much space at all. This can save you a great deal of valuable storage room compared to other models of water heaters that are available. They also tend to have many fewer problems with them than other types of water heating systems.

A tankless water heater system operates by using a line or pipe. Hotels and businesses have been using this type of design for years as it allows hot water to quickly reach the outlet. This is because the user doesn’t have to wait for the tank to refill and then for the water to heat up as is the case with traditional tank water heater systems. A tankless water heater system allows you to have the hot water you want on demand without any hassles.

The price of a tankless water heater system keeps many consumers from making the purchase. They are fairly new to the market and have only started being offered to consumers who aren’t of a commercial nature. The prices are still pretty high, about 9 times more than a traditional water heater system. This is definitely enough of a price difference to affect one’s budget.

Another concern with tankless water heaters is that they tend to offer a lower temperature than traditional water heaters. This is because the water is flowing through the heating department without being heated to a particular temperature. This can leave the water at a lower temperature than some people are happy with.

A tankless water heater system is much more energy efficient because it isn’t continuously running. This is a major selling point and helps to justify the initial purchase price of the system. You will save money on your monthly energy bill when you switch from a traditional water heater system to a tankless water heater system.

You can also find more information at gas tankless water and refurbished tankless. eTanklessHotWaterHeater.com is a comprehensive resource for tankless water heater with information on reviews, installation and how it works.

Living in the city, means you have a water supply from a water treatment plant. Living in the country, you rely on a well for your water supply to the home. In rural areas, a well could be dug 90 foot, 150 foot, or even 400 foot into the ground, for a water supply to be reached for your home. Well water does require continued testing, at least every few years, to determine if your water is safe, and of a quality type.

Depending on the particular housing set up, you water could come from the well to a holding tank in the home, or a holding tank outside underground near the home. Additionally, along with wells, many homes in rural areas depend on springs and holding areas for water for all their personal water needs. All of these situations require different types of water treatment, for the best possible water quality.

Lead can be a very risky situation in the home, and can be found in water. Lead leads to problems for children and adults, with situations causing high blood pressure, certain types of cancer and anemia as well as mental deficiencies. A simple water test, that you can complete yourself, is going to tell you if your well water is high in lead. A well water treatment system can lower the levels of lead in the water.

Additionally a well water treatment system can lower the levels of salt, heavy metals, iron and herbicides or pesticides in the water. If you live in a rural area, or with a water supply near an abandoned mine, you may test your water and find various contaminants that could be hazardous to you and your families health. A well water treatment system can put your mind at ease, so you are controlling what you are putting into your body and lowering the potential health hazards.

A well water treatment system in a holding area could include the use of a UV light to kill algae or bacteria in the water. A well water treatment system could include the use of treating the water in the home, before it is dispersed anywhere in the home using a salt treatment method, chlorine treatment or a filtration system, depending on what you find when you test the water from your well.

A well water treatment system is designed not only to treat those problems you are faced with right now in your well, but also a variety of potential hazards that could arise in the future. For example, with bacteria, you prevent typhoid, dysentery, and gastrointestinal problems associated with bacteria. With high salt and nitrogen in the water, a well water treatment system is going to prevent an ongoing poisoning in the household. Radon is also found in the water, and when entering the house through your well water, and then into the air, you would never even realize it until it is too late. Controlling all of these instances and problems is completed with the use of a well water treatment system.

You can also find more information at extensive water treatment and water filter cartridge. eWaterTreatmentSystems.com is a comprehensive resource for water treatment with information on reviews, reverse osmosis and how it works.

Craftsman is a brand name made exclusively for Sears. Wood working tools were added to their line of power tools in 1926. Several companies actual have made the tools for the brand name. You can tell which company made the tool based on the prefix of the model number on the older tools. Craftsman offers several table saws in varying sizes and prices to fit the needs of numerous customers.

1. 10-inch table saw with stand-This is the smallest model Craftsman offers in a table saw. This model has a smaller 13-amp motor. The stand is not portable and is to prevent wobbling. The miter gauge has preset stops for the most common angle cuts. This basic model is priced right for the homeowner who does occasional hobby work at a cost of $120.

2. 10-inch portable table saw-This Craftsman table saw has a collapsible stand with wheels for easy moving from one job site to another. Crosscuts are smooth with a built-in miter gauge on the sliding miter table. Rip cuts can be a 30-inch right or a 7-inch left on the sliding rails. This model has a 15-amp motor, on-board storage, dust port and collection bag, and 1/32 scale for accurate measurements on the rails. This model costs around $270.

3. Professional portable 10-inch table saw-For the professional who has more work to get done, this Craftsman table saw is sturdier for that heavier use. The rip capacity is increased to a 33-inch right and a 30-inch left. This model also has the sliding miter table, but its miter fence is oversized. It has a built-in router table and mounting kit for a later addition of a router if you want that extra. The tabletop with the extensions out is 48″X32″. This professional model sells for $450.

4. 10-inch stationary table saw with wooden extension and tilt arbor-Moving up in capacity, Craftsman table saw model #22805 has a large 76″X27″ table with the extensions all the way out. Weighing 537 pounds, this model is not meant to be portable, but it is meant to be a heavier duty ripping saw. It comes complete with a miter, rip fence, and tilting arbor. Regular price is $1300.

5. 12-inch stationary table saw with wooden extension and tilt arbor-This model is similar to the previous heavier duty table saw except that it has a 12-inch blade. Two versions are offered for your convenience: one has a left-tilt arbor, and the other has the right-tilt arbor. The tabletop is a little larger than the previous model, stretching out to 81″X30″. Of course, as the workload capacity increases so does the price. This model comes in at a regular price of $1600.

Craftsman offers several other table saws that come between these small, medium, and large models. One is sure to meet your workload needs and budget.

Johnathon is a professional carpenter for over 20 years and has experience in helping customers renovate their homes. Johnathon is woodwork enthusiast who works with jigsaws, table saws, circular saws and many other varieties of saws. Visit his specialty site on delta table saws at http://www.szaws.com.

Stainless steel appliances are a nice upgrade for you home. That being said, you need to make them last, which means you need to know how to keep them sparkling.

A routine maintenance schedule should be adhered to about every three or four months depending on how much you use your appliances. Another problem to be addressed is the everyday cleaners that build up on your stainless steel appliances. Knowing how to get this residue off and keep your appliances nice and shiny will keep your appliances looking new for many years to come.

The process is pretty simple, but you will need to purchase a polish specifically formulated for use on stainless steel appliances. Once you have your polishing cream on hand, you can begin the de-gunking process. Go ahead and fill a bucket or pail with warm soapy water. Dish liquid or other nonabrasive cleaners can be used in this step. Something with a degreaser in it will be handy when it comes to getting the grease off of the stove. Now work the cleaning solution into the grain of the stainless steel and then come back at it from the other direction. This will loosen up any stuck-on residues. Dry the appliance with a dry towel.

You are now ready for the next step of the process, the rebirth of the sparkle. When you finish with drying the appliance, it will be dull. Don’t be alarmed because the polishing cream you purchased will restore the shine that made you want the stainless steel in the first place. Apply the cream according to the manufacturer directions. Be sure to wipe off any excess polishing cream right away.

Now you can use another dry towel to buff the polishing cream back off. Be sure to wipe with the grain for best results. You may have to really put some elbow grease into getting it as shiny as you would like for it to be. After you know how to de-gunk stainless steel appliances and you do a good job of it, it will be easier the next time you are faced with this task.

Getting the job done right the first time should be your main concern. Don’t worry if you can still see a few marks in various places on your appliances. You can always get them the next time now that you know how to do it correctly.

Find professional carpet cleaning services at http://carpetcleaningyeti.com/index.

Boice-Crane began making woodworking machinery for non-professional woodworkers in December of 1926 when W.B. and J. E. Boice partnered their business with H.G. Crane. At the time of the merger, two plants were in operation. H.G. Crane owned the Adrian plant, and J.E. Boice owned the Toledo plant.

The Boice-Crane Company made lightweight tools for the average consumer with only a few products developed to go into the industrial field. Once the company failed in the 1980’s, Wilton Corporation bought the drill press production line and Comet Engineering Incorporated bought the radial arm saw production line. Gothenburg Manufacturing Company took over the parts business and supported the spindle sander, belt sander, and scroll saw until their company also failed.

The Boice-Crane 3500 table saw was manufactured some time around the late 1960’s to the early 1970’s. It had a 1 1/2 horsepower motor that was 220V. The 10-inch blade was raised, lowered and tilted with controls located on the front of the cast iron encased cabinet. This cabinet type table saw was driven with a triple belt system. The table size was 36 inches by 27.5 inches and this could be enlarged to 63 inches with the extension table. It came equipped with a steel rip fence and a blade guard.

After searching several sites that offer old manuals and repair parts lists, I could not find a specific manual for this particular table saw. However, the 3500 model had many of the same features as the previous 2500 series of Boice-Crane table saws. The saw blade tilts with a rotating handle crank leaving the table itself stationary. A dial indicates the degree of the angle to offer an accurate way to measure your angled cut. Hand levers lock the saw and fences into place to provide security from slippage. The gear boxes are totally encased and grease-packed for longer wear. The large tables were built for a greater load capacity than most other table saws. The hood guard tilts with the blade for extra safety. Other safety features include a large splitter with two anti-kickback dogs to keep both pieces of wood from being thrown forward. The motor located separately in the steel encased cabinet reduces vibration that could interfere with good quality cuts.

Since the Boice-Crane 3500 table saw is considered a vintage piece of machinery, it may not meet modern standards for safety and quality. Anyone who is interested in restoring this antique table saw may have difficulty in finding appropriate replacement parts because the companies that bought out the different lines have also gone under. However, with the World Wide Web at your fingertips, you could probably find someone with a similar interest in vintage woodworking machinery that can point you in the right direction.

Johnathon is a professional carpenter for over 20 years and has experience in helping customers renovate their homes. Johnathon is woodwork enthusiast who works with jigsaws, table saws, circular saws and many other varieties of saws. Visit his specialty site on delta table saws at http://www.szaws.com.

In a recent survey conducted by several government health agencies, it was discovered that over 80 percent of homeowners and more than 60 percent of employees are concerned about the quality of air inside their homes and offices. In a time where pollution and allergens are at an all time high, it is becoming more and more important to look for individual solutions to keep the quality of air we breathe safe for our homes and families.

For many years the only options available for air purification were small, machines that simply passed air through a paper filter. These machines were adequate at cleaning large particles from the air, but were unable to remove bacteria, mold and other dangerous airborne pollutants.

In the last 15 years however, new technological developments in the air purification industry have led us to ionic air filtering.

Ionic air purifiers are without a doubt one of the most reliable and effective air purification technologies available on the market today. In fact, they are so effective that they have become the industry standard for hospitals and clean air facilities around the world and are able to eliminate allergens, chemicals, bacteria, odors, viruses and many other types of contaminants.

An ionic air purifier cleans the air by dispersing negatively charged ions into the atmosphere to attract positively charged contaminant particles. These negatively charged ions then bind themselves to the pollutant particles and are returned to the purifying unit.

Once inside, the air purifier the machine reverses the polarity of the charge on the ions, separating them from the dirt particles. Unlike conventional air purifiers, the ionic air purifier collects the contaminants on special metal collector plates instead of paper or glass filters. These plates are cleaner than the other filters, but do build up pollutants over time and should be washed weekly.

Once the pollutants are separated from the dirt particles, the ions are re-charged and sent back out and the entire process is repeated. Depending on the quality of an ionic air purifier, this process can be repeated as many as 20 times per minute.

There are many different models of ionic air purifier available and it can be incredibly difficult to select the right model. When choosing the right ionic air purifier it is important to consider the size of the room or area to be cleaned as well as the sensitivity of the inhabitants.

The simple rule pertaining to room size is: the larger the room, the larger the model required to clean the room.

The same is true for the level of contaminants. The higher the level of contaminants in a room, the more powerful the machine required to eliminate those contaminants.

Almost every ionic air purifier is able to filter out the same types of contaminants, but people who suffer from allergies or asthma will often require a more advanced machine because they are more susceptible to irritants than people who have no allergies.

If you’re looking to improve the quality of air in your home, consider the Oreck Air Purifier which uses both ionic and hepa filtering technologies.

Copyright 2007. You may reprint this article on your site provided you include author’s resource box and active links.